The Vis-1 fibre optic KVM extender is the most complete solution of available! The video source can be either analogue RGB or digital DVI, a first in the industry. The VIS-1 KVM extender system will support USB, PS2, and Sun (legacy) keyboard and mouse, USB tablets, full duplex stereo audio, serial and even stereo graphics emitter signals (BNC) for immersive graphics (3D) applications. 

The Vis-1 is a digital fibre optic transmitter/receiver system. All video, keyboard, mouse, USB, serial, audio and stereo graphics emitter signals from the computer source are digitized and converted to light at the transmitter. These optical signals are then sent to the Vis-1 fibre optic KVM receiver via two fibres. One fibre supports the video and the other supports all other KVM signals.

NOTE: The Vis-1 KVM Extender, as with all other thinklogical video & kvm extenders is fully compatible with all other thinklogical extenders. The transmitter from one thinklogical KVM extender may be used with any thinklogical KVM extender receiver (excepting the Dual-Link DVI products). This unique feature allows customers to extend digital (DVI) sources to analogue (RGB) destinations and vice versa.

The KVM receiver converts the video signals back from optical to both RGB and DVI standard formats, which allows the use of either traditional analogue monitors or newer DVI display devices. If RGB is preferred, the receiver can output any of three video sync configurations, RGBHV (separate H & V), RGsB (sync on green), or RGBH/V (composite). No external converter boxes are required. The system also has connectivity for all common keyboards and mouse types, USB, PS2 and Sun legacy. All electronic conversion, remapping and even international translation is supported. No more keyboard converter boxes. Everything you need to assure compatibility between the computer and the user station devices is bundled into the Vis-1 KVM Extender system already.

Features:

• Fiber optic KVM extension range of up to 1,000 meters
• Fully compatible with all other thinklogical KVM extenders
• No proprietary cabling required- uses standard cables and connectors
• requires only 2 multi-mode fibers
• Stand Alone and Rack Mountable options included
• USB support for tablets, USB touch screens and Human Interface Devices (HID)
• Supports PS2, Sun Legacy, and USB Keyboard and Mouse
• Local video, keyboard and mouse at CPU (kvm transmitter) end
• Duplex stereo audio
• RGB and DVI supported to 165 MHz VESA standards
• BNC for stereo graphics emitter for 3D applications
• Front panel programmable for unique video formats
• Universal conversions between DVI and Analog RGB – DVI or RGB source to either DVI or RGB display
• Serial port (DB9) supported for touch screens and serial tablets

Specs:

Video Resolution DVI: 1600 X 1200 @ 60Hz RGB: 1600 X 1200 @ 60Hz Stereo: 1280 x 1024 @ 100Hz.

Supply Voltage 100-240VAC, 47-63 Hz Universal AC power supply

Operating temperature 0°-50°C; (32°-122°F)

Humidity 5-95% RH, non-condensing

Physical Dimensions Rack size: EIA 19" Height: 1U-1.75" (4.45cm) Width: 17.25" (43.82cm) Depth: 14" (35.56cm)
Copper Cables Required: RGB Video to Computer HD15 to DVI-I male to male, 6 feet (supplied) (1) DVI Video to computer DVI-I to DVI-I male to male, 6 feet (supplied) (1) USB Keyboard/Mouse to Computer USB A to B, 6 feet (supplied) (2) PS2 Keyboard/Mouse to Computer MiniDIN 6, male to male, 6 feet (supplied) (2) Sun Keyboard/Mouse to Computer MiniDIN 8, male to male, 6 feet (supplied) (1) Audio to Computer 3.5mm, male to male, 6 feet (supplied) (2) Serial to Computer DB9, male to female, 6 feet (supplied) (1) Stereo Emitter to Computer BNC, male to male, 50 Ohm, 6 feet (supplied) (1) Copper Connectors: Video (Transmitter) DVI-I (2) Video (Receiver) DVI-I (1) Audio MIC Right 3.5mm Jack (Transmitter and Receiver) Audio MIC Left 3.5mm Jack (Transmitter and Receiver) Audio LINE 3.5mm Jack (Transmitter and Receiver) Serial Port (Transmitter) DB9 Female Serial Port (Receiver) DB9 Male Stereo Emitter Input (Transmitter) BNC Stereo Emitter Output (Receiver) BNC USB Keyboard USB A (Transmitter and Receiver) USB Mouse USB A (Transmitter and Receiver) USB Local Keyboard USB A (Transmitter) USB Local Mouse USB A (Transmitter) PS2 Keyboard MiniDIN 6 Female (Transmitter and Receiver) PS2 Mouse MiniDIN 6 Female (Transmitter and Receiver) Sun Keyboard/Mouse MiniDIN 8 Female (Transmitter and Receiver) PS2 Local Keyboard MiniDIN 6 Female (Transmitter) PS2 Local Mouse MiniDIN 6 Female (Transmitter) Sun Local Keyboard/Mouse MiniDIN 8 Female (Transmitter) USB Keyboard/Mouse from CPU USB B (Transmitter) Download USB USB B (Transmitter and Receiver) Fiber Connectors ST, SC or LC Optical Cable Dual Fiber Multi-Mode 50 or 62.5 micron (available, not supplied)

Distance Range Up to 1000 meters (3280 feet)

Power Consumption 10 watts per unit Weight 10lbs. (4.4kg)

Shipping Weight: 18lbs. (8.1647kg)

Warranty 12 months from date of shipment Extended warranties available